Inside Our Al Qusais Aquarium Workshop in Dubai

By Water Wonders Updated 4 min read
Large glass panels moved by forklift at the Water Wonders workshop
In this article
  1. Why build in-house
  2. One team, from sketch to handover
  3. Materials and quality
  4. Control under one roof
  5. Delivery and installation
  6. FAQ
  7. What a custom build involves from start to finish
  8. Glass or acrylic: choosing the right material
  9. Questions to settle before you order

Water Wonders builds from an 8,000 sq ft facility in Al Qusais Industrial Area 3, Dubai. Design, engineering and fabrication all happen under one roof, and have since 2001. This is why that matters when you order a tank that has to hold water safely for years.

Why build in-house

An aquarium is only as good as its joints, panels and plumbing, and each of those is easier to control when one team does the work. We decide the material, cut and bond the panels and assemble the life-support system ourselves. It also lets us build shapes that are difficult to subcontract: curved walls, cylinders and seamless room dividers.

Glass aquarium construction in the workshop

One team, from sketch to handover

The people who design the tank are the people who build and install it, so questions about the drawings are answered by someone who will work on the finished product. There is no hand-over between designer, factory and fitter. You can follow the full route in our installation process.

Materials and quality

We work with professional-grade glass and acrylic and build life-support systems for the UAE’s climate. Our products are made with quality materials and under our own supervision, and they carry a warranty whose length depends on the product.

Control under one roof

Manufacturing happens under our own supervision, so the people responsible for a tank are the people who build it.

Glass aquarium panels positioned during fabrication

Delivery and installation

Large tanks need planning: access routes, lifting and the position of the equipment. We organise that as part of the project, then fill, cycle and hand over the finished system.

FAQ

Does Water Wonders build its aquariums in-house?

Yes. They are designed and fabricated in our Al Qusais facility in Dubai.

Since when?

Since 2001, which means more than 25 years of aquariums and water features in the UAE.

Where exactly are you?

Al Qusais Industrial Area 3, Dubai. Contact us on +971 4258 7622 to arrange a conversation about your project.

Read more on our about page or look at the custom aquarium service. To start a project, request a quotation.

What a custom build involves from start to finish

A custom aquarium is not picked from a catalogue. It moves through a series of stages, and knowing them helps you plan your space and your timeline.

  1. Brief and site details: You tell us what you want to display, where the tank will sit and how it will be viewed. Measurements of the room, the floor and the access routes matter as much as the tank size.
  2. Design and drawings: We choose the material, panel thickness, bracing and stand construction to suit the dimensions and the water volume.
  3. Fabrication: Panels are cut, bonded and left to cure in the workshop. Acrylic can be shaped into curves and cylinders, while glass suits clean, flat, highly transparent walls.
  4. Testing: The finished tank is filled and checked for leaks before it leaves the workshop.
  5. Delivery, installation and handover: The tank is moved into position, connected to its equipment, filled and cycled.

Glass or acrylic: choosing the right material

Both materials are used for professional tanks, and the right one depends on the shape and the setting.

  • Glass: Resists scratching and stays clear over time. It suits rectangular tanks and is a sensible choice in busy areas where surfaces get touched or cleaned often.
  • Acrylic: Lighter than glass for the same size and can be formed into curved walls, tunnels, cylinders and seamless panels. It scratches more easily, but scratches can usually be polished out.

Weight matters when a tank goes into an apartment, villa or office. Floor loading should be checked before you settle on a size, because a filled tank is very heavy.

Questions to settle before you order

  • Where will it go? Check the floor strength, the width of doors and lifts, and whether a wall can be opened if access is tight.
  • Freshwater or marine? Marine systems need more equipment and more regular attention than freshwater ones.
  • Where will the equipment sit? Filtration and pumps can go in a cabinet under the tank or in a separate room, which keeps the display quiet and tidy.
  • Who will look after it? Decide early whether you will do routine care yourself or arrange a maintenance routine, since water quality drives the long-term health of the animals and the look of the tank.
  • Which animals are planned? Species affect the size, the filtration and the temperature control the tank needs. Hot summers in the UAE make cooling an important point to discuss.

Having answers to these before you request a quotation makes the design stage quicker and the quotation more accurate.

Share this article

Let's build something extraordinary.

Custom aquariums, koi ponds, water features and more, designed and installed across the UAE.

Leave a Reply

Your email address will not be published. Required fields are marked *